Returns

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

General Talogak Pen Eater 1.0

This fellow will attempt to swallow your pen. The result is a perfect place to store your pen when not in use. he also has a bit of weight so that he could double as a paperweight. It holds one pencil, two if you are creative.

The pen holder is a miniature image of General Talogak from the separatist wars in the country of Lin on the planet Ragon. After roughly 460 years of terrible war, General Talogak ended it within 3 weeks of taking command of the separatist forces. His strategy was simple, brutal, and effective. If they don't have food, they cannot fight. By simply changing the strategy from direct conflicts over cities to burning the Centralist bread basket, the Falajak Vally. The centrists had to pull all forces back to contain the fires. They soon offered a peace deal, realizing their enemy's willingness to go to any length to gain victory. To this day, General Talogak is recognized as a great peacemaker despite causing a famine that killed 63 million.

The Origins/ material sources of this product:
The pen holders were made with water-washable resin sourced from Nevada, USA! The Pen Eater is a 100% US-made product!

If you like the print and want a digital copy of the model, feel free to download it. There is no charge; if you are interested in supporting the Grinning Gears cause, purchase the above product.

Talogak .stl dowload right here:

Download

Talogak .blend dowload right here:

Download

Returns

1 / 10

2 / 10

3 / 10

4 / 10

5 / 10

6 / 10

7 / 10

8 / 10

9 / 10

10 / 10

❮ ❯

Blue ¼ socket holder

Keep your 1/4-socket secure with our 15-hole socket holder. Contains 1/8, 5/32, 3/16, 7/32, ¼, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, ½, 17/32, 9/16. Two-layered and compatible with our other socket holders, so you can mix and match colors or have regular and deep sockets together. Comes in both regular 1-inch socket and deep 2-inch socket designs, make your selection in the dropdown. Come in 7 colors, including the blue you see above! Made out of pctg, sourced from Huntsville, Alabama, USA, and printed in Hurst, Texas. This is a 100% made-in-the-USA product.

Returns

1 / 10

2 / 10

3 / 10

4 / 10

5 / 10

6 / 10

7 / 10

8 / 10

9 / 10

10 / 10

❮ ❯

Blue ¼ socket holder

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" Deep Socket Case and ¼” Socket Case; Price: $16

You don't need the Extension case? Well, we have a deal for you! The ¼" Deep Socket Case and ¼ Socket Case combo brings together the four pieces that are dedicated to just sockets! The sockets that these cases carry are first your standard sized sockets, 1/8 ", 5/32 ", 3/16 ", 7/32", ¼, "9/32", 5/16 ", 11/32", 3/8 ", 13/32", 7/16 ", 15/32", ½", 9/16", also deep sockets, 1/8 ", 5/32 ", 3/16 ", 7/32", ¼ ", 9/32", 5/16", 11/32", 3/8 ", 13/32", 7/16 ", 15/32", ½ ", 9/16", all are ¼" inch drive. If you change your mind about the extensions, you will be complete with the purchase of the ¼" drive extension case!

Not only is the ¼" Deep Socket Case and ¼" Socket Case combo a great purchase, but it's also sustainable. Designed and printed in the USA, this set is made of PLA, a material that's not only recyclable but also created from renewable sources like corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp. This eco-friendly choice earns it extra plant points!

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The magnets are produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" Deep socket holder and ¼" Socket Holder; Price: $8

2 in one! A combo to match our competitors. These guys do the job of holding your standard SAE sockets. The sockets that these holders carry are first your standard sized sockets, 1/8 ", 5/32 ", 3/16 ", 7/32", ¼, "9/32", 5/16 ", 11/32", 3/8 ", 13/32", 7/16 ", 15/32", ½ ", 9/16", also deep sockets, 1/8 ", 5/32 ", 3/16 ", 7/32", ¼ ", 9/32", 5/16", 11/32", 3/8 ", 13/32", 7/16 ", 15/32", ½ ", 9/16", all are ¼" inch drive. They are also easily upgraded into full cases by purchasing the ¼" SAE Socket Holder Cover Model 0.00 and the ¼" Deep SAE Socket Holder Cover Model 0.00.

Investing in this product is not just a smart choice, it's a sustainable one. Designed and printed in the USA, it's made of PLA, a highly recyclable material derived from plant sources like corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp. This eco-friendly material earns it extra plant points.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" Extension Case; Price: $15

¼" Extension Case It was made for just the extensions, ohh, and the ratchet itself. The holder and the cover click together nicely and snugly. This case is guaranteed to hold your extensions in one place within a bag or box, but not if you drop it. This piece contains a slot for the ¼" ratcheting handle and a series of ¼" straight extensions, including 6", 3", 4", and 2", plus an infinite slot, though it will stick out. The pieces that make up this item are ¼" SAE Extension Holder Model 0.00 and ¼" SAE Extension Holder Cover Model 0.00.

This is a purchase you can feel good about! Not only is it designed and printed in the USA, but it's also made of PLA, a sustainable and highly recyclable material. PLA is created from corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp, earning it extra plant points and making it an environmentally responsible choice.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" Socket Case; Price: $9

The complete case for your standard SAE sockets! This case will keep your sockets together in any bag or box you put them in. with the added benefit of being compatible with any brand, including ¼" drive impacts. The particular sockets are 1/8 ", 5/32 ", 3/16 ", 7/32 ", ¼, "9/32", 5/16", 11/32", 3/8 ", 13/32", 7/16 ", 15/32", ½ ", 9/16", all of which are ¼ inch drive. The parts that make up this purchase are, ¼" SAE Socket Holder Model 0.00, ¼" SAE Socket Holder Cover Model 0.00, ¼" Deep SAE Socket Holder Model 0.00, and ¼" Deep SAE Socket Holder Cover Model 0.00.

Make a sustainable choice with this ¼ " Socket Case. Not only is it designed and printed in the USA, but it's also made of PLA, a material that's not only recyclable but also derived from plant sources such as corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp. This eco-friendly material earns it extra plant points.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is actually produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The magnets are produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" Deep Socket Case; Price: $12

We got a case for the standard size, and of course, we have an option for the SAE deep sockets! This design is a particular favorite of our customers, with its unique interlocking feature. Because of the design, this specific case is hair that is more drop-proof than the others. The case can carry 1/8", 5/32", 3/16", 7/32", ¼", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", ½", 9/16", all are ¼" inch drive. The part numbers of the pieces are ¼" Deep SAE Socket Holder Model 0.00 and ¼" Deep SAE Socket Holder Cover Model 0.00.

Here's a fantastic purchase! Not only is it designed and printed in the USA, but it's also crafted from PLA, a sustainable and highly recyclable material. PLA is derived from corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp, earning it extra plant points and appealing to the environmentally conscious.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" SAE Socket Holder, Model 0.00; Price: $5

Our most basic model, the ¼ "SAE Socket Holder, is a versatile tool capable of accommodating all your ¼" sockets. It can also be upgraded to a full case with the purchase of the ¼" SAE Socket Holder Cover Model 0.00. This holder is designed to fit specific socket sizes, including 1/8", 5/32", 3/16", 7/32", ¼, "9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", ½", 9/16", all of which are ¼ inch drive. It is compatible with any brand, including ¼" drive impacts.

This is a great purchase! Not only is it designed and printed in the USA, but it is also made of PLA, a sustainable and very recyclable material. PLA is created from corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp, so it gets extra plant points.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is actually produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The Magnets are Produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" SAE Socket Holder Cover, Model 0.00; Price: $5

The cover for the ¼" SAE Socket HolderModel 0.00. It brings completion to the holder by keeping your sockets secure. The lid is held on by three magnets that prevent the sockets from getting away from you. This product comes with the added benefit of 3 attachment points, making it compatible with the ¼" SAE Extension Holder, Model 0.00. Meaning, if you wanted to upgrade to the six-piece set, you would only have to buy the ¼" deep socket case, and the ¼" extension case.

This is a purchase you can feel good about! The ¼ " SAE Socket HolderModel 0.00 Cover is not only designed and printed in the USA but also made of PLA, a sustainable and recyclable material. PLA is created from corn starch, sugarcane, tapioca root, cassava, and sugar beet pulp, earning it extra plant points and making it an environmentally conscious choice.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The Magnets are Produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C
NOT A HOLDER! ONLY A COVER for ¼" SAE Socket HolderModel 0.00

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼” Deep SAE Socket Holder, Model 0.00; Price: $7

¼” deep sockets, we have an option for them as well. Every ¼” deep socket you could collect can fit in this model. The specific sockets are 1/8”, 5/32”, 3/16”, 7/32”, ¼”, 9/32”, 5/16”, 11/32”, 3/8”, 13/32”, 7/16”, 15/32”, ½”, 9/16”, all are ¼” inch drive. This piece can also be upgraded to a full case by purchasing ¼” Deep SAE Socket Holder Cover, Model 0.00.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The Magnets are Produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼” Deep SAE Socket Holder Cover, Model 0.00; Price: $7

The Cover for ¼” Deep SAE Socket Holder Model 0.00 is held on by four magnets, making it the most secure of the covers. This Cover makes the holder semi-drop-proof, preventing spillage in the case of a drop. With five attachment points, this product is very compatible with the other 2 cases.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is actually produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The Magnets are Produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C
NOT A HOLDER ONLY COVER for ¼” Deep SAE Socket Holder, Model 0.00

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼" SAE Extension Holder, Model 0.00; Price: $9

The ¼ "extension holder, the largest of our current holders, is a versatile tool that serves as the backbone of the 3-case set. It features a slot for the ¼" ratcheting handle and a series of ¼" straight extensions, including 6", 3", 4", and 2", plus an infinite slot, though it will stick out. With the purchase of the ¼" SAE Extension Holder Cover Model 0.00, you will own the entire extension case.

This is a great purchase! Not only is it designed and printed in the USA, but it is also made of PLA, a sustainable and very recyclable material. PLA, derived from corn starch, is a testament to our commitment to environmental responsibility, earning extra plant points in the sustainability department.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The Magnets are produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C

Add to Tab

1 / 6

2 / 6

3 / 6

4 / 6

5 / 6

6 / 6

❮ ❯

¼” SAE Extension Holder Cover, Model 0.00; Price: $9

The frosting at the top of the 6-piece set is the extension holder cover. It is held to the top of the ¼” SAE Extension Holder Model 0.00 by 3 magnets. Though the least stable of our covers, it still works as a dust cover and should hold your extensions when carried in a bag or toolbox. With this purchase and the purchase of the ¼” deep socket case and the ¼” extension case, you will have our complete ¼ holder series.

The Origins/ material sources of this product:
Our PLA plastic, which we use as printing material, is produced in Vietnam. We fully intend to develop and make our own locally(within the US), but we are still growing. The Magnets are Produced within China. Again, eventually, we aim to make the magnets and source the magnetite locally as well.

NOT HEAT PROOF! Will warp if exposed to temperatures at or exceeding 160 F or 71C
NOT A HOLDER! ONLY A COVER! for ¼” SAE Extension Holder, Model 0.00

Add to Tab

The print	Instructions
supports	No
raft	No
fill	30%
Layer thickness	0.2mm
Material type	PLA
Print positioning	bottom down on the plate/float

Talogak Pen Holder 1.0

Talogak Pen Holder 1.0

1-Inch Socket Holders

1-Inch Socket Holders

2-Inch Socket Holders

2-Inch Socket Holders

Blue ¼ socket holder

Blue ¼ socket holder

The Objective

Our official YouTube channel: https://youtube.com/@grinninggears?feature=shared

Our Guys! and Partners!

Our little contact form, yes, we might even respond!

When you hit send, you should receive an automatic email with a copy of your message. If you do not receive an email, try again or directly email [email protected]

Your Tab!

Bulk/Custom Order Form

hit send and you will recieve an confimation email. if you are looking to get a custom order such as your own parts or products printed. We will go over the deatails over emial.

If you own even one printer you are elgible

We are looking for totally orginal 3d print designs

When you hit send, you should receive an automatic email with a copy of your message. As well as more instructions on what to do next. If you do not receive an email, try again or directly email [email protected]

Talogak Pen Holder 1.0 The Details

Talogak Pen Holder 1.0

1-Inch Socket Holders See More

1-Inch Socket Holders

2-Inch Socket Holders See More

2-Inch Socket Holders

Blue ¼ socket holder

cartPaypal.AddToCart({ id: "AL6MJUNV5CDM4" })

cartPaypal.AddToCart({ id: "TFAEFLNZA5VX2" })

cartPaypal.AddToCart({ id: "AVY5SKBP6LX58" })

cartPaypal.AddToCart({ id: "WMQCEXZRBW8C2" })

Blue ¼ socket holder

cartPaypal.AddToCart({ id: "SA6V7PYCABMDG" })

cartPaypal.AddToCart({ id: "MDAJBMDXH634A" })

cartPaypal.AddToCart({ id: "MAG8WM9JZS5EL" })

cartPaypal.AddToCart({ id: "J86RPWZAGDKUQ" })

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Other Options

The Objective

Our official YouTube channel: https://youtube.com/@grinninggears?feature=shared

Our Guys! and Partners!

Our little contact form, yes, we might even respond!

When you hit send, you should receive an automatic email with a copy of your message. If you do not receive an email, try again or directly email [email protected]

Your Tab!

Bulk/Custom Order Form

hit send and you will recieve an confimation email. if you are looking to get a custom order such as your own parts or products printed. We will go over the deatails over emial.

If you own even one printer you are elgible

We are looking for totally orginal 3d print designs

When you hit send, you should receive an automatic email with a copy of your message. As well as more instructions on what to do next. If you do not receive an email, try again or directly email [email protected]

Talogak Pen Holder 1.0

1-Inch Socket Holders

2-Inch Socket Holders